▲

TANDEM SIZING

Sizing is really important when it comes to making sure you're comfortable on your tandem, and we offer a wide range of standard sizes throughout our models and also custom frames.

If you are considering making a purchase without visiting us, then we would strongly recommend completing the sizing form below. We will use this information to set up one of our test ride models to your dimensions, which we will then photograph and email over to you so you can see how the tandem looks, so that when your tandem arrives you will have 100% confidence to know it'll be a great fit. If you are interested in a custom built tandem we can produce you a computerised drawing of your prospective new tandem set up to your dimensions. If you would like a CAD drawing please mention in the additional comments section. There is no charge for this design service and you are under no obligation to proceed with a purchase.

If you are planning to visit us to test ride prior to making a purchase, then completing the information below ahead of your visit will allow us to set up our test ride models to suit you more precisely.

Completing the section below with just your inside leg measurements and heights, will allow us to make a guess as to the size of tandem you could ride, but we can't be certain without detailed information from your existing tandem or solo bikes.

All sections marked with a * require completion.

1. About Yourselves...

Email Address*

Your Website

Telephone No*

Alternative Telephone No

Pilot's Name*
Front rider

Pilot's Height*cm

Pilot's Inside Leg Measurement*cm

Stoker's Name*
Rear rider

Stoker's Height*cm

Stoker's Inside Leg Measurement*cm

2. About Your Current Bikes/Tandem If you are existing tandem riders then measure your tandem, or if it doesn't fit you very well then measure your solo bikes instead.

Choose a cycle that you ride that fits you really well; if you are thinking of a drop handlebar tandem for the front rider then measure a drop handlebar bike, and likewise if you are thinking of a flat handlebar tandem on the front then measure a flat handlebar bike.

What are you currently riding?

Tandem Solo

Tandem CAD

3. Tandem Front measurements

A
from the ground to the centre of handlebarcm

B
centre of the handlebars to the high point of the brake hood/sti. ignore this dimension if measuring a flat handlebar bikecm

C
nose of saddle to the centre of handlebarscm

D
centre of top of the head tube to centre of the seat post measured horizontally with the groundcm

E
centre of pedal axle to the centre of crank boltcm

F
centre of the crank bolt to top of the seat clampcm

G
taken using a plumb line held onto the nose of saddle and then the distance between the plumb line and the centre of the crank bolt is measuredcm

H
centre of the crank bolt to the top of saddlecm

I
ground to the top of saddlecm

4. Tandem Rear measurements

J
from the ground to the centre of handlebarscm

K
nose of the saddle to the centre of handlebarscm

L
measured from the centre of front seat tube where it crosses the centre of the top tube to the centre of the seat post measured horizontally with the groundcm

M
centre of pedal axle to the centre of crank boltcm

N
centre of the crank bolt to top of the seat clampcm

O
taken using a plumb line held onto the nose of saddle and then the distance between the plumb line and the centre of the crank bolt is measuredcm

P
centre of the crank bolt to the top of saddlecm

Q
ground to the top of saddlecm

Additional Info

Is there anything else we might need to know about your cycling position?

Privacy:
By submitting this form, you are sharing your name, email address and telephone number and other personally identifiable information with us. We need this information so we can deal with your request. Data provided will not be used for any other purpose. Please refer to our Privacy Policy for more detail.

We have placed cookies on your browsing device to enable this website to function correctly.
Further usage of this website indicates you are happy for us to do this..
Find out about the cookies we have set and how we use them.